Puff HTV: Your Guide to Using this Iron-On Product



This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

You may have seen or heard of puff HTV and wondered what all of the fuss is about. Well, I am here today to show you how this product works and inspire you to give it a try for yourself. I really think you will love this product and the amazing dimension it can add to a plain shirt. Be sure to pick up some and give it a try for yourself. I know you will love using puffy HTV for your heat transfer vinyl projects!

puff htv shirt

Puff HTV

You can actually watch me apply puff HTV to a shirt in the video below. You will also want to watch to the end so you can see a close-up of that puffiness! If you loved that puff paint look in the 80s, this is one product you will want to try as soon as possible.

Can’t watch the video or missed some of the steps? You can also follow along below!

Supplies:

puff htv and a cricut machine

How to Use Puffy HTV

Now let’s take a look at how to cut, weed, and apply this heat transfer vinyl product to a shirt.

Adding to a Mat

The Puff HTV is white on one side and the color that you are using on the other. The white side is actually shiny and the color side is more matte. However, the color side is what goes against the mat. You will need to remember that when using this product.

adding 3d htv to a cricut cutting mat

I think a lot of times you hear a shiny side against the mat, and that is not true in this case. If you want to check that on any product you’re using, just take the corner and peel back a little piece. Then you can tell the difference between the product side and the liner side. You want the clear liner down onto the mat, which in this case, is really not the shiny side. Then just apply it to the mat and I like to make sure it’s stuck down really well. 

cutting puff htv on a cricut

Cutting Puff HTV

Now we’re ready to cut and you do want to mirror your design. Remember if the good side is down on the mat you always mirror. I find that just the regular HTV setting on my Cricut works. I just use the iron-on setting with the Cricut Explore Air 2. Once you have your setting, just load the mat into the Cricut machine. NOTE: Any Cricut machine will cut this product. Then, press the “go” button to cut. Once it’s done cutting, we’ll just remove the mat and move on to weeding the design.

cricut machine cutting 3d puff htv

Weeding

Weeding is similar to any HTV. You’re just going to weed away all the excess from around the outside, as well as things like the centers of any letters. I do find that this product weeds fairly easily. I don’t find a ton of difference in the puff versus regular HTV. Once your design is completely weeded, it’s time to press it onto our shirt.

weeding puff htv

Pressing

I went ahead and pre-pressed the shirt just to remove any moisture. I have my heat press set at 305 and we’re going to press this for 10 seconds at medium pressure. You might be able to get the same result with the Easy Press, but I would definitely use one that would cover your entire design and not a small one where you would have to move it. Locate your design onto your shirt then press.

NOTE: If you only have an EasyPress, check out this post where Color Me Crafty successfully used puff HTV.

adding tennessee to a shirt with htv

It is a hot peel, so just as soon as it is done, peel back the carrier sheet on the top. The material will already be puffy as soon as the pressing is complete.

puff htv after pressing with a heat press

3D Puff HTV Final Result

Now let’s take a closer look at just how much this puffs up now that it’s off the press and that carrier sheet is off.

3d htv on a white shirt

It’s pretty amazing in person! I hope you can tell just how much of a puff you get with this product. It can make an amazing addition to your crafts. This is just a word pressed on a shirt and it looks so good now that it’s off the press.

3 dimensional htv on a shirt

I think you’ll agree that the puff HTV looks amazing. It really stands off the shirt even more than a flocked HTV. If you’ve ever used flocked HTV, this stands up even more off of the shirt.

puff htv on a shirt

Care Instructions and Notes

They do recommend washing it inside out with cold water on a gentle cycle. You will want to note that on anything you make for yourself, that you make to give to others, or that you make to sell. I will also say this is good for cotton, uncoated polyester, fabric blends like polyester, acrylic, that type of thing, but no nylon. They specifically say that. I used it on a 100%-cotton shirt, and it worked amazing! Just note that you wouldn’t want to use something that’s nylon with this, but otherwise buy that puff HTV, have fun, create some amazing projects.

angie holden wearing a tennessee shirt

If you remember the puff paint craze of the 80s and 90s, this takes it to a whole new level with HTV that puffs up once it’s pressed to your garment. The puff on this stuff is frankly pretty amazing!

3d puff htv shirt

I really love this, especially for super simple designs because although the design is simple, once I make it out of that puff HTV, it takes it to a whole new level. All of a sudden, it looks stunning and amazing, and it’s all with one product, one simple cut, and a simple t-shirt.

puffy htv shirt

So, be sure to pick up some puff HTV and give it a try for a project soon. I know you are going to love how it looks on your shirt!

how to use 3d puff htv

Need more ideas with your Cricut? Try the links below as well!

paper flower shadowbox
Paper Flower Shadowbox

This DIY shadowbox is perfect with paper flowers made on your Cricut machine.

Read More

bow for cheerleaders
Cheer Bows with Heat Transfer Vinyl

Make cheer bows with your Cricut machine and HTV using these easy to follow instructions.

Read More

make a puzzle out of a picture
How to Make a Photo Puzzle

Make a puzzle from a picture with these easy to follow instructions and your Cricut Maker.

Read More

diy acrylic cake topper cut on a cricut
Acrylic Cake Topper with a Cricut

Use your Cricut Maker to cut plastic and make this cute cake topper for any party!

Read More

easy banner made from paper on a table
Making a Cricut Banner

This easy DIY project is perfect for those just getting started with their Cricut and can be used for any occasion!

Read More

You can also use the card below to print the 3D HTV instructions!

puffy htv shirt

How to Use Puff HTV

Give 3D puffy HTV a try for your next Cricut shirt project!

Supplies

  • Walakut Puff HTV I’m going to use orange.
  • White shirt
  • Weeding tools
  • Cricut machine
  • Heat press
  • Green Cricut mat This particular brand of Puff HTV sticks best to a Cricut green mat instead of a blue mat.

Instructions

Adding to a Mat

  • The Puff HTV is white on one side and the color that you are using on the other. The white side is actually shiny and the color side is more matte. However, the color side is what goes against the mat. You will need to remember that when using this product.

  • I think a lot of times you hear a shiny side against the mat, and that is not true in this case. If you want to check that on any product you’re using, just take the corner and peel back a little piece. Then you can tell the difference between the product side and the liner side. You want the clear liner down onto the mat, which in this case, is really not the shiny side. Then just apply it to the mat and I like to make sure it’s stuck down really well.

Cutting Puff HTV

  • Now we’re ready to cut and you do want to mirror your design. Remember if the good side is down on the mat you always mirror. I find that just the regular HTV setting on my Cricut works. I just use the iron-on setting with the Cricut Explore Air 2. Once you have your setting, just load the mat into the Cricut machine. NOTE: Any Cricut machine will cut this product. Then, press the “go” button to cut. Once it’s done cutting, we’ll just remove the mat and move on to weeding the design.

Weeding

  • Weeding is similar to any HTV. You’re just going to weed away all the excess from around the outside, as well as things like the centers of any letters. I do find that this product weeds fairly easily. I don’t find a ton of difference in the puff versus regular HTV. Once your design is completely weeded, it’s time to press it onto our shirt.

Pressing

  • I went ahead and pre-pressed the shirt just to remove any moisture. I have my heat press set at 305 and we’re going to press this for 10 seconds at medium pressure. You might be able to get the same result with the Easy Press, but I would definitely use one that would cover your entire design and not a small one where you would have to move it. Locate your design onto your shirt then press.

  • It is a hot peel, so just as soon as it is done, peel back the carrier sheet on the top. The material will already be puffy as soon as the pressing is complete.

Tried this project?tag us to show off your work!



[ad_2]

Source link

Recent Content